Polishing marble can be performed on all types of floors. If the floor is still in good condition and no scratches, then polish the floor can be done.
Here is how to polish the floor:
• Prepare the equipment: machine marble polisher, vacuum cleaner wet, red pad Buffing, Buffing white pad, steel wool pad.
• Prepare chemical marble; wax stripper, yellow powder, floor cleaner, and water.
• Install Red Buffing pad in polisher machine.
• Pour in the floor wax stripper to clean the floor from dirt and old wax remaining.
• Start slowly marmer with polishing machine back and forth direction.
• Dry the floor using a vacuum cleaner.
• Pour 1 teaspoon yellow powder every 50cm on the ground that will polished.
• Wet yellow powder with water.
• Run machine marble polisher renewal.
• Scrub floor slowly back and forth direction.
• To facilitate, polish the floor area of 1 m2.
• Keep the floor remains wet.
• When you are finished, the next floor polish area 1m2.
• Conduct ongoing until the end of the room.
• Suck a puddle of water use wet vacuum cleaner.
• When you are finished, pour the wet floor and floor cleaner taste.
• Still wearing Buffing pad renewal of red marble, polished floor like a way mentioned above.
• Suck water on the floor to dry.
• clean when there was still some water.
• Install white Buffing pad and cover with a little steel wool pad.
• Spray a little liquid crystals on the floor.
• Scrub the floor until dry and shiny.
• Apply wax on the floor
• Scrub the floor until shiny.
• Done.
Leave a Reply